电子万能试验机 电子拉力试验机 冲击试验机 熔体流动速率测定仪 塑料滑动摩擦试验仪 万能制样机 高阻测定仪 纸箱耐压试验机 安全帽冲击试验机 电压击穿试验仪 马丁耐热试验仪 塑料球压痕硬度计
拨号13581986832

联系我们

  • 北京冠测精电仪器设备有限公司
  • 公司地址:北京市昌平区沙河王庄工业园内
  • 公司传真:010-51651740
  • 联系QQ:1225767627

扫一扫,立刻沟通

你的位置:首页 > 产品展示 > 橡胶塑料常用仪器 > 热变形维卡软化点温度测定仪 >2018Z新热变形维卡软化点温度测定仪

产品详细页
2018Z新热变形维卡软化点温度测定仪

2018Z新热变形维卡软化点温度测定仪

  • 产品型号::RBWK-300C
  • 更新时间:2018-03-23
  • 产品介绍:变形维卡软化点温度测定仪采用具有Windows 98、Windows2000或WindowsXP中文操作界面,实时监控试验温度、实时绘制温度及变形量的曲线,打印试验报告,实现历史存盘,鼠标点击形变和温度曲线的任何一处,界面会自动显示该处的变形量及温度值。选用高精度位移传感器测变形。
  • 在线留言 010-57223838

产品介绍

热变形维卡软化点温度测定仪(6路)

型号:RBWK-300C

热变形维卡软化点温度测定仪适用范围:

主要用于塑料、硬橡胶、尼龙、电绝缘材料、长纤维增强复合材料、高强度热固性层压材料等非金属材料的热变形温度及维卡软化点温度的测定。操作方便、控制精确,是一种智能化极高的测试仪器,广泛应用于大专院校,科研单位及产品质量监督检验单位。

==========================================================================

热变形维卡软化点温度测定仪功能:

热变形维卡软化点温度测定仪采用具有Windows 98、Windows2000或WindowsXP中文操作界面,实时监控试验温度、实时绘制温度及变形量的曲线,打印试验报告,实现历史存盘,鼠标点击形变和温度曲线的任何一处,界面会自动显示该处的变形量及温度值。选用高精度位移传感器测变形。

=========================================================================

热变形维卡软化点温度测定仪执行标准:

符合GB/T 1633-2000、GB/T 8802、

GB/T 1634-2004、ISO 2507、ISO 75、ISO 306、     

ASTMD 1525、ASTMD 648等标准要求。

=======================================

热变形维卡软化点温度测定仪技术参数:

1)控温范围:室温~300℃

2)zui大温度误差:±0.5℃      

3)升温速度:50℃/h、120℃/h

4)温度测量点:1个

5)试验架数:6个

6)变形测量范围:0~10mm    

7)zui大变形误差:±0.005mm

8)试样支承跨距:64mm(平放优选)、100mm(侧立)

9)具有上限温度保护功能;

10)控制方式采用单片机和PC机分布式控制系统;    

12)具有试样架自动升降系统;

13)使用介质:甲基硅油或变压器油;

14)冷却方式:150℃以上自然冷却,150℃以下水冷却或自然冷却。

13)外形尺寸:920X400X1300mm

================================================

热变形维卡软化点温度测定仪配置:

 1)主机                        一台                       

2)试样架                      六个

3)热变形压头                  六个

4)维卡压针                    六个

5)高精度位移传感器            六支

6)品牌台式计算机              一台

7)彩色喷墨打印机              一台

8)中文版下操作系统的试验软件  一套

9)电源线                      一根

10)信号线                     一根

11)砝码                       一套

名称

规格

A

B

C

D

E

F

G

H

I

J

K

质量(g)

1000

932

500

200

100

50

20

10

5

2

1

件数

24

6

6

12

6

6

12

6

6

12

6

 

  

 

 

英文资料如下:

The thermal deformation of VEKA softening point temperature testing instrument (6 Road)

Model: RBWK-300C

The thermal deformation of VEKA tester applies softening point temperature range:

Mainly used in plastic, rubber, nylon, electrical insulating materials, determination of softening point temperature high strength composite material, laminated thermosetting materials and other non-metallic materials thermal deformation temperature and VEKA long fiber reinforced. Convenient operation, precise control, is a test equipment of inligent high, widely used in universities, scientific research units and product quality supervision and inspection unit.

===========================

The thermal deformation of VEKA tester functions softening point temperature:

The thermal deformation of VEKA tester with Windows 98, Windows2000 or WindowsXP Chinese interface softening temperature, temperature and deformation of real-time rendering, real-time monitoring test temperature curve, print test reports, achieve historical disk, the mouse to click on the deformation and temperature curve at any point, the interface will automatically display the deformation and the temperature of the value. Selection of high precision displacement sensor to measure the deformation.

=========================================================================

=========================================================================

The thermal deformation of VEKA tester standard softening point temperature:

According to GB/T 1633-2000, GB/T 8802,

GB/T 1634-2004, ISO 2507, ISO 75, ISO 306,

ASTMD 1525, ASTMD 648 standards.

=================================

The thermal deformation of VEKA technical parameters of softening point temperature measuring instrument:

1): room temperature to 300 ℃ temperature range

2) the maximum temperature error: ± 0.5 ℃

3) the heating rate: 50 ℃ /h, 120 ℃ /h

4) temperature measurement points: 1

5) test frame number: 6

6) deformation measuring range: 0 ~ 10mm

7) the maximum deformation error: ± 0.005mm

8) sample supporting span: 64mm (flat preferred), 100mm (side)

9) has an upper limit temperature protection function;

10) control by SCM and PC machine distributed control system;

12) with a sample rack automatic lifting system;

13) use of media: methyl silicone oil or transformer oil;

14) cooling: 150 ℃ of 150 ℃ natural cooling, water cooling or cooling.

13) size: 920X400X1300mm

================================================

================================================

The thermal deformation of VEKA configuration softening point temperature measuring instrument:

1) a host

2) sample frame six

3) thermal deformation pressure head six

4) VEKA pin six

5) the high precision displacement sensor six

6) brand desktop computer

7) color inkjet printer a

8) Chinese version under the operating system of a set of test software

9) a power line

10) signal line

11) the weight of a

 

 

留言框

  • 产品:

  • 留言内容:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 详细地址:

  • 省份:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7
??
在线咨询
QQ客服
QQ:1225767627
电话咨询
010-57223838

关注微信